Mass Production Started

Today I approved mass production of the Divo cup. As I am nearing the end of research and development second phase, which is testing the actual consumer product (as opposed to testing prototypes), I need more testing done with more people, preferably by the chemical penis enlargement community, especially my consultation clients. My clients are already in communication with me, so the required feedback by serious enthusiasts is much more easier to get than from a total stranger. Also, the divo cup is a key technology that I used for my enlargement, something I know my clients need to maximize growth efficiency. More details on all~day stretching devices can be found by google search, but basically the divo cup is allowed to hang unrestricted by pants and underwear on the penis tip, so blood can pool and hang lower from its increased weight, and protect the glans from friction that is known for its desensitization effects.

If the divo cup is worn with underwear that prevents it from moving freely and hang unsupported, it will be uncomfortable, may fall off, and the enlargeing effect is minimized. Those who are not willing to go commando won't earn a bazooka! -_-

Minor changes to pants may be in order. When buying new pants, shop while wearing your divo cup. I had to buy pants a few sizes bigger and then I tailored the waist to fit. The worn divo cup should not go down and stay in either pant leg, or movement during the day will loosen it up and it may fall.

The divo cup unit comprises of 5 different sizes, taken from statistical data collected on penis sizes around the world. You (the buyer) should take full advantage of trying on each size until you find one that fits the following criteria:

-glans penis touches the inside of divocup, with no air bubbles

-stays on during the day under clothes

-easy to take on and off during rest room breaks

-comfortable to wear (no pain during use)

The divo cup is designed to be worn from morning 'til night, NOT during priapisms or sex, although those areas have not been fully explored.

The materiel used is PET plastic, which according to my research is the safest plastic to use outside the body, and is the same plastic used for bottled drinking water. (It is also recycleable where such facilities exist). My initial prototype is PET plastic, and is safe as can be considering 2 years of daily use.

A silicone gasket system is in the works, and is designed to work with each divo cup. It is intended to be sold seperately or bundled with the divo cup unit when available. An industrial mold is currently being made for the 2nd prototyping phase, as the 1st generation gaskets needed revision. The new design should be ultra comfortable, and prevents air leaking into a worn divo cup. More detailed info as this develops in the coming months.

Major apologies to those expecting to purchase a divo cup set this month. The past timeline was much too optimistic, but the end is finally in sight. Minor revisions in the manufacuring process was needed to make sure the product will meet my demands. Thank you so much for understanding.

Please stay in touch via facebook (search for Ronielle Buduhan) and twitter (RonielleMTL). And thanks for reading!

Ronielle, end transmission.

Industrial Moulds Finally Finished

Just received photos of the moulds, test gaskets and the assembled Divo Cup. It is amazing how something I designed on google sketchup (a program used in 3D design) is now a photo, and soon to be in my hands. This is like my baby!

After many delays and mould tests, I await the final product to test and approve for production, and to take some much needed photos and videos for my new divo cup website. It is at this time I would like to see guys in the Montréal area to test fit,  but not to give away just yet.

This is a very exciting time for me, and there is a lot of work left to be done. So perhaps this small delay is for the best, but I really did have my hopes up with the best case scenario delivery time of end of august. Probably to many of you guys as well.

The wheel is still rolling, slowly but surely. I will keep you updated. I am told that manufacturing is quick, on the scale of days, but the delivery is long as air shipping from china is so expensive (they will be shipped by boat). Estimated delivery is end of august, if the final sample meets my approval.

There are so many of you writing to me about the divo cup, it really makes me happy. All those times thinking I'm weird for attaching a cup to my dick, I guess that since so many people want one, I will no longer be the only one wearing a divo cup by the end of this year.

Thanks goes out to all of you for supporting me with kind words. This project would not have gotten far without your continuous feedback. If it becomes popular enough, legions of men will be hung in the future. Just that though is enough to feed my wildest dreams! Like I once heard, "There are 2 types of gays, sizequeens and liars"

I have a modification to that," there are 2 types of guys in the world; those who want a bigger dick, and liars". Ha!

For guys out there who are veterans of pe, and are successful in their enlargement, please get in touch with me. Ideas of a support group are floating in my head.

I hope to return with good news in the near future!

Metta to all! 

Minor Delays and Tester's 7 day Results

The manufacturer has reported a 3 day delay in the completion of the moulds of the divo cup, but that should not seriously effect the delivery date of the end of August.

Tester has reported a visible soft lengthening after 7 days of use of the divo cup, which further encourages wearing at all times. He wore his on average of 8 hours per day, and has complained only of slight pinching when bending over, which I commented that it happens when the divo cup is not allowed to hang freely down (he was wearing shorts and the divo cup was going down one pant leg instead of hanging in the center). It took me a while to figure that out!

I used to get pinched all the time by the divo cup. But as I started to wear looser pants, the free hang produced better results in flaccid length, less discomfort, and and overall comfort. Now it would be nice to find clothes made specially with a tight waist and a long inseam! But for now, 2 sizes bigger plus some minor tailoring does the trick.

Thanks for all the new facebook friend requests. It is really fun to know that I'm a part of the penis enlargement community. Unfortunately the field is full of worthless gimmicks and such, with no proof. We rarely hear of the person who wore an extender and gained 2 inches, with pictures of his final size. But that is the way in the industry, and that reputation is what I am up against. What can I do to improve my chances?

Thanks for reading!

Dome moulds to be Finished this Week!

The production of the divo cup is well underway. The first batch will be sent to me probably next week, and if I accept the finished product mass production will begin late july. The finished product should be here before September.

2 testers have found the divo cup easy to wear, and easy to remove for cleaning. Full time use will have to wait until the sample of silicone gaskets arrive for approval, which should be sometime late next week.

Part of the mould for the domes are finished, and I'm awaiting news for the first run production. Finished products could be here soon for testing, and public availability before september.

I am away to be the Master of ceremonies in early september, but if the divo cups are ready for shipping then I will ship them from where I am.  Please look for announcements on divocup.com

Working hard on the packaging leaflets for the domes. My goal for this month is to get the new website for divo cup distribution up and running. Wish me luck!

Prototypes received! Pics in Use Below

Prototype Received!

My manufacturer has sent me my prototype, which contains 5 Divo cups of various sizes plus a lid. This summer is when the first batch of domes will be available to the general public. All those who are interested in being put on a mailing list to be notified on the exact date, please let me know.

Thank you to all who have written to me about it! It is your voice that has pushed me this far to mass produce the Divo cup. I am really proud of the new design, and I hope you like it too!

Next big step is looking for a manufacturer for customized silicon cockrings, which I have decided would be included with the divodomes. Wish me luck.

Prototypes En Route

Progress is made on delivering the now called DivoDomes to the public. There are 5 different sizes, and each unit will contain all sizes so you can make sure you have the perfect fit for any occasion. But I do need to test the fit on different guys, so I am looking for volunteers in Montreal to get fitted by yours truly. Anyone interested?

Now, these units are designed for life-long use, and progression through the sizes are expected. The size of the Divodome in my pictures is the 4th largest size, in case you were wondering. A silicone cockring is used to seal the vacuum between the dome and the penis for a secure fit.

The domes are unmarked for now, and its function is not apparent. So travelling or having it displayed is very discreet since they look innocent enough. Packaging will be kept to a minimum as I am trying to reduce waste products, and to reduce recycling loads.

Please keep in mind that my enlargement process includes chemical injections, so users of the DivoDome may not have the same results as I do. And due to individual response, results may vary.

I just enjoy wearing it all the time! 

New Name Search For the Divocup

To avoid complications, a new name for the divocup is in order. I love the name divocup, but to trademark a name it should be more than 1 letter different than another trademark.

Divocup

Diva Cup

Too similar for my taste, and rather lacking in imagination on my part to copy a name. I open the blog readers to look at the pictures and make up a name, and send your suggestions to me. But I have a few already being pondered, and the new name will be a surprize!

While the initial experience in dealing with a chinese manufacturer is less than good, I have decided to work instead with a local business. Communication breakdown is the biggest problem with the chinese manufacturer, and also the fact that they kept on asking for more money all the time because they misquoted me initially. No, this is too risky for me and I rather deal with someone face to face with my designs.

I had to learn how to draw in 3D this week to spot errors in design. So I am finding that product design is actually a lot more work than I imagined! But it is a good work for me, since I have had previous engineering training in university.

So to end this entry, with rapid prototyping my initial costs will be less, and the device may well be available by this summer, if all goes well!

Wish me luck!

Informal Penis Survey

As an escort, penises are my job. I see lots of them, hard and soft, and love it. My next project is making a divo cup with a 1" diameter, which I think is what many guys would fit into when soft. I will document it and offer it as a download for those who can't wait for the massed produced version, saving lots of money in the process. Stay tuned!

Many guys are fearful of taking pictures of their dicks. Their don't like it on picture or some other complaint, but the fact is this: I wished that I took more shots of mine so I can compare it better to what it looks like now. Wearing the divo cup really makes me more penis proud, and I actually like seeing it on in the mirror. The thickness and flaccid length is accentuated after a few hours of wearing it, especially in warm weather where it hangs the lowest.

Take cock pics is the moral of this post. You can document it like it really is, and no one else has to see them.

The Manufacturer's Hunt Continues

Having spoken to a local plastics manufacturer who seems not very interested in returning communications, i am now pursuing a manufacturer in China. I am hoping to have the Divo Cup available to the general public by this July, but there are no promises.

But in the mean time, i would like to know how many people would like to build their own if they had the plans to make them. If the response is high enough then i will create a document for instant download so you can bypass the wait and get the stuff to make your own.

News on wearing the Divo Cup: now, to those who have been following me for some time know that I got a circumcision 7 years ago at age 25. The reason was because my foreskin was very long, and keeping condoms on was difficult for the most part. Since safe sex is my job, and because of the health benefits of staying cleaner and reducing the surface area which can harbor microorganisms on my penis (ever wonder why women keep getting yeast infections? Men keep re-infecting them), I decided to get the cut.

Now I was going from full coverage to constant exposure. I felt my glans become desensitized over the months post-surgery, since the head was no longer protected. Chemical penis enlargement made my shaft grow faster than the nerves can keep up, and I had a few months of numbness on the tip until (I believe) the nerves grew to resensitize the mushroom cap. Sensitivity did return, but never to pre-circumcision levels. However, wearing the divo cup for almost a year has restored sensitivity dramatically.

Acting like a smooth clear case, nerves are well nourished by blood since the light suction helps increase circulation, unlike devices which use a noose-type constriction. The silicone cock rings are not tight enough to squeeze, only enough to prevent air from leaking into the cup while it is hanging of the penis.

No friction is on the glans at all except for sexual activity, and it is noticeable.

So for those who feel like increasing their head sensitivity perhaps protecting it from friction can help. You may have success wearing a well fitting condom during the day, which is what i used to do before I started using the divo cup. The latex doesn't last many removing and reusing cycles though.

Penises with too much sensitivity can slowly desensitize by not wearing underwear. A cock ring around the scrotum can help keep the foreskin up if needed (it is tricky with foreskin, but it can be done).

I hope that the manufacturer in China works out! Then in the very close future many guys around the world will show me pictures of them wearing the divo cup... a happy sight indeed!

Location : 533-619 Avenue Duluth Est, Montreal, QC H2L 1A9,

Pictures of The Divo Cup

Here are a few pics of the Divo Cup in my hand. Crystal clear unbreakable food grade plastic, easy to sanitize, this is easy to wear since there is no noose-type constriction of blood vessels and stays on using a very light vacuum seal. In future posts I will show you how I put it on. For the moment, there is only one size that I can make it, so others may need to add silicone cock ring seals to ensure an airtight seal. Since this is a prototype that I am using on myself, I cannot guarantee that it will fit well on other penises. There are ways of adapting the opening for smaller penises, so experimentation is the only way to find out if the Divo Cup will work for you.

Welcome to My Extreme Minimalist Underwear Blog!

I am very excited to share with you a piece of technology I needed to ensure I keep all my gains from chemical penis enlargement. It is a cup made exclusively for wearing on the tip on the penis called a Divo Cup. It is held in place by a vacuum seal left after evacuating the air from the cup as the lubricated penis is inserted completely. It is crystal clear plastic so you can properly position your penis inside the cup. It is worn 24 hours a day, removed only to clean, to urinate, and to have sex. The Divo Cup is not currently available in stores, and could be made to order.


Here is why you would wear one:

-to catch urine dribbles at the tip of the penis (No more embarrassing stains!)

-to reduce penis desensitization by cupping the head, protecting from friction against clothing (Glans Helmet feature!)

-to keep the penis extended away from the body to encourage gains from chemical penis enlargement experiments. (A major part of the program)


I wear mine like it's underwear. Being nude is great, but wearing a Divo Cup is better. It makes my dick bigger by keeping it hanging down the way nature intended, and improves the sensitivity during sexual activities. And last but not least, it catches embarrassing pee dribbles that happens to every man, whether they admit to it or not.

The Divo Cup is very comfortable to use, but I admit that it can be tricky getting used to it at first. To put it on requires a method of venting air out of the Divo Cup while the lubricated penis is inserted. Once it is all in, the venting device is removed and a suction is formed, keeping the Divo Cup from falling off the penis. That's it!

My next post will be pictures of the Divo Cup. Please contact me if you are interested in knowing more.