Measurements for Single Divocups are for Non-Erect Diameters!

Remember, selecting a size is done when you are soft, since the divocups are designed to hang on only while flaccid. I want to thank all of you who ordered the divosleeve this weekend, I'm sure you will love them for a long time!

Just a quick reminder!

Ronielle

Location : 1234 Avenue Papineau, Montreal, QC H2K 4R2,
Ronielle

Memorial Day Sale! Free Divosleeve Prototype WIth New Divocup Purchase!

To encourage rapid results, a warm penis is necessary for jelqing and for recovering, and the weight adds nicely to the divocup, for a non constrictive, warm shart stretch. I have been testing the divosleeve for a few months and I am convinced that new users will find it a welcome addition to their penis enlargement toolkit.

To encourage potential new buyers, the divosleeve will be added to all orders from now until Tuesday, the 31st of May. The divosleeve will need to be filled with ordinary uncooked rice and a few stitches to keep it closed, once you have adjusted it for your own perfect fit. Pop it in the microwave 10 seconds at a time, inserting a finger carefully to test the heat. Once you are sure that it won't be too hot to burn your dick off (be careful!), stretch it over your divocupped dick and adjust it over the shaft by distributing the grains evenly by massaging the sleeve. The warm heat and the weight gently coaxes your penile tissue to elongate, and as it cools down the stretch remains in the shaft. Seperately, the divocup and divosleeve work great, but together the results (and the comfort) are exciting.

Enjoy the long weekend, and take advantage of this promotion today!

May your research experiments give fruit!

Ronielle

Divosleeve Development

Fortunately for those interested in the divosleeve, hand-made versions are now available for purchase. Unlike the divocups which I had mass produced at a plastic injection mould factory, the divosleeves will be sewn up on a per order basis. It will be available in two ways: prefilled and complete, ready to use, and unfilled, to be filled and finished by the end user.

The benefits for ordering the unfilled version is that it costs less for shipping, and that you can fill with your favorite grain that is microwaveable, as well as controlling the amount of fill: more filling for a tighter fit and more weight, less filling for a more comfortable fit and lighter weight. This option allows the user to fine tune the divosleeve size to their exact needs. Since the opening can be reopened by removing the thread holding it closed, when needed the grains can be removed and the divosleeve can be thrown in the washing machine with your towels. Dry in the dryer, then refill as before. If you need a needle and thread, one can be provided for your convenience.

The completed version is for those who are not interested in fine tuning the weight and size of their divosleeve, nor do they wish to do a few hand stitches with needle and thread to close the divosleeve. It is more convenient option, however there may be issues with customs because of the grains (some countries are strict with this). Ordering a completed divosleeve is perfect for orders within Canada, but outside the country they may be confiscated.

With my latest prototype being slimmer than before, the divosleeve can be heated for less than 30 seconds in the microwave, worn over the divocup all day even when the heat wears off (it stays cozy for a long time). With the right pants/shorts it can be worn in public by shifting the grains to behind the penis, where the bulk is less noticeable and the shaft is pushed forward making a nice visible penis line.

I will accept orders by email request at this time for the introductory price of $25 for the unfilled version, $35 for the filled version, free shipping, sent by regular mail.

As I said, this is a handcrafted item and made-to-order, so please allow 2 days before shipping.

Thank you all for your support!

Ronielle

 

Location : 1234 Avenue Papineau, Montreal, QC H2K 4R2,
Ronielle

In-between Sizes: Problem and Solution

So far the most common complaint (roughly 10% of new divocuppers) is that they don't have a perfect fit: one size is too tight and the next size up is too large. This problem can occur when penis growth forces you to move up in size, or days with extreme penile fluctuations. Here is what I suggest:

You need a condom and water-based lubricant (optional) to do this.

The divocup falls off because air is leaking into the cup, removing the slight vacuum effect. Putting the loose divocup on (using water-based lube if needed, not oil since it will destroy the latex condom), then unrolling a condom over the divocup until the divocup is completely covered and the condom goes over the rim to touch your shaft. The cup will now be sealed, and it is now secure. Go ahead and do the shake test. If there are no air leaks, it is done correctly. If it falls off, make sure the condom is touching your skin all around the rim of the divocup, and there is no air trapped under the condom.

To remove the divocup/condom assembly, gently insert fingers under the condom and move it over the rim of the divocup. With care, the condom can be used for several days before it needs to be replaced. Now you can clean the inside of the divocup and use as usual, slipping the condom seal back in place with your next use.

The use of a condom should be temporary for a few weeks/months as the penis grows enough so the condom is no longer necessary. Other penis enlargement techniques such as jelqing or injection therapy can speed up the transition time between sizes.

Please be aware that progression in divocup sizes becomes slower as your girth increases, and that at times you may need to switch back to a smaller cup. Due to the dynamic nature of the male sexual organ, expect to move back and forth between sizes as needed.

Please, if you have any problems and concerns, please contact me and I will find a way to address your issues.

That's it for now!

Ronielle out

Location : 1299 Avenue Papineau, Montreal, QC H2K,
Ronielle

Divocup and Divosleeve Combo Tests Continue

I have to admit, wearing only the divocup all day feels like I'm naked with only a helmet on my head, but I like wearing the divosleeve on top of the divocup better. After wearing the divosleeve (my experimental microwaveable all day shaft weight), and although I feel like I always want to wear it (the feeling is very, very cozy), there are several design flaws in my current prototype.

The divosleeve is bulky, and shows even when wearing loose pants. In public, more concealment measures, such as wearing a long shirt in front or tying a long sleeve shirt around the waist, may be necessary. Possible solutions to this problem is to redistribute the weight to behind the penis, and/or use a filler that is more efficient at holding heat with less bulk.

The divosleeve is not washable because the grains inside (that retain the microwave energy as heat) should not be allowed to get wet. A possible solution is to create a washable sleeve that goes around the heated part so it is protected from touching the penis skin.

The next design problem is fitting all possible penis sizes. While my prototypes fit me perfectly, it may not fit everyone. The specific problem is length; how long should it be? Another problem is girth; what is tight for some is too loose for others. But I think I have a solution for that, though.

Working on these problems through trial and error, and researching new materials and designs is taking longer than usual, and hopes of bringing it to market is not very strong at this time. Perhaps they will be made to order, with selection of design and filling as options. My sewing skills are little better than amature though, so a professional looking product is not available unless I find a better method of making them.

Results of thess past weeks of wearing the divosleeve is very encouraging, and my willingness to wear them just for the feel tells me that it has the potential to be a great product one day. It does not swing between the legs when walking around like traditional 'tip of the dick' weights, and attaching it to the divocup is simple, with no blood-contricting connection points to cause discomfort.

If you like this idea, please send me a message. Your interest in my inventions is very important to motivate me to pursue further product development.

Thanks to all my readers!

Ronielle out

Location : 1281 Rue Beaudry, Montreal, QC H2L,
Ronielle